ViaSat-3 Americas set for expendable Falcon Heavy launch

Date:
Wed, 26 Apr 2023 15:06:25 +0000

Description:
Falcon Heavys second launch of 2023 is being prepared for liftoff with the ViaSat-3 Americas The post ViaSat-3 Americas set for expendable Falcon Heavy launch appeared first on NASASpaceFlight.com .

FULL STORY ======================================================================

Falcon Heavys second launch of 2023 is being prepared for liftoff with the ViaSat-3 Americas satellite as the main payload, plus the much smaller Arcturus and G-Space 1 rideshare satellites.

Liftoff is currently scheduled for Wednesday, April 26, at 7:29 PM EDT (23:29 UTC) at the start of a 57-minute window. The launch will take place from Launch Complex 39A at the Kennedy Space Center in Florida, as it is currently the only Falcon Heavy-capable launch pad.

This flight the sixth overall for Falcon Heavy had been scheduled for April 18 but was delayed after its preflight static fire. The firing was not
nominal and revealed at least one undisclosed issue with the vehicle that needed to be corrected in the hangar. Accordingly, SpaceX replaced two
engines on Falcon Heavys first stage.



Additional delays could be possible if the weather does not cooperate on launch day. The Space Launch Delta 45ths weather forecast shows a 40% chance of violating launch criteria, with primary concerns being the anvil cloud and cumulus cloud rules. In the event of a 24-hour delay, the weather remains at 60% go for launch.

The Falcon Heavy for this mission consisting of core B1068, booster B1052, and booster B1053 will be expended due to the need for all available performance. This results from needing to insert the ViaSat-3 Americas satellite directly into geostationary orbit.



The Falcon Heavy, after firing its 27 Merlin engines with a total of 22.82 meganewtons of thrust, will launch due east into a trajectory typical for geostationary satellite launches. The second stage will be flying an extended mission and will have a band of gray thermal insulation to keep the stages propellant at its proper temperature. See Also ViaSat-3 Americas Updates SpaceX Missions Section L2 SpaceX Section Click here to Join L2

A direct geostationary orbit insertion requires the upper stage to perform multiple maneuvers, including the circularization burn at apogee, before releasing the satellite to conduct its mission at an altitude of 35,786 kilometers above Earth. Since the satellite itself does not need to expend fuel on the circularization burn, the fuel saved can extend the spacecrafts useful life.

Due to the direct geostationary orbit insertion, Falcon Heavys boosters will be expended by falling into the Atlantic Ocean after separation. The core stage will be expended in a similar manner. None of the booster elements contain recovery hardware such as titanium grid fins, landing legs, and RCS thrusters.

Boosters B1052 and B1053 have served as Falcon Heavy boosters on previous flights, while B1052 also served as a Falcon 9 first-stage booster for five launches. B1052 and B1053 flew as side boosters on the Arabsat-6A and STP-2 flights in 2019, making successful dual return to launch site landings at
Cape Canaveral Air Force Station. Falcon Heavy conducts a static test firing of its 27 engines before the ViaSat-3 Americas mission. (Credit: Nathan
Barker for NSF)

B1052 was converted to become a Falcon 9 booster before flying the CSG-2 , Starlink 4-10 , Starlink 4-18 , the South Korean Danuri Moon probe , and the Starlink 4-20 missions in 2022. This will be B1052s eighth and last flight
and B1053s third and final launch as well.

After Starlink Group 4-20 last September, B1052 was converted back into a Falcon Heavy side booster for its final flight, while B1053 has not flown since STP-2. B1068 was manufactured strictly as a Falcon Heavy core and is making its first and last flight. Falcon Heavy cores require additional reinforcement and are not used as Falcon 9 boosters.

The main payload for this flight is the ViaSat-3 Americas, the first of three new geostationary communication satellites that together are intended to provide continuous near-global broadband service to 99% of the populated world.

ViaSat-3 satellites, each massing approximately 6,000 kilograms (kg), utilize the Ka-band, and will deploy one of the largest reflectors ever flown. The reflector, made of carbon fiber, reinforced polymers, and graphite, will be deployed at the end of a boom derived from one that deployed the James Webb Space Telescopes sunshade. The ViaSat-3 Americas satellite. (Credit: Viasat)

The ViaSat-3 series will also have eight solar panels that can collectively generate around 25 kilowatts (kW) of power, one of the highest power-generating capabilities ever for any communications satellite. The spacecraft and its solar panels will have a span of 43.9 meters, which is
just about a third of the span of the International Space Station.

The power system and reflector will enable the ViaSat-3 Americas to have a throughput of up to one terabit per second, which is double the throughput of Viasats entire satellite fleet up to now. The entire ViaSat-3 constellation will have a throughput of up to three terabits per second, up to 500-600% of the capacity of the Viasat network before this year.

ViaSat-3 Americas is planned to use the geostationary orbital slot at 88.9 degrees West and is designed for an orbital lifetime of at least 15 years.
The satellite, based on the Boeing 702MP bus, was built at Boeings El
Segundo, California facility and shipped to Florida aboard a Ukrainian
Antonov AN-124 cargo aircraft.

There are two small satellites on this flight that will also be placed into geostationary orbit. The Arcturus satellite, with a mass of 400 kg, was built by Astranis to provide broadband services to the state of Alaska for Pacific Dataport. The spacecraft will use a slot at 163 degrees West longitude.

Arcturus, also known as Aurora 4A, is the first Astranis commercial satellite to be launched. The spacecraft is designed for a lifetime of 10 years. It utilizes the Ku band with a throughput on the order of 7.5 Gbps. The spacecraft, built in San Francisco, will use electric propulsion to maintain its orbit, along with two solar panels to provide electric power. The
Arcturus satellite, the first commercial MicroGEO satellite to fly. (Credit: Astranis)

The Arcturus satellite is one of Astranis MicroGEO satellites, which are
meant to provide dedicated service to one region. In this case, Arcturus will serve Alaska, whereas other MicroGEO satellites built by the company will serve Peru and mobility markets (air and sea).

The G-Space 1 satellite is a 16U cubesat built in Denmark for Ukraine-based Gravity Space. The satellite, massing 22 kg, is designed to support communication services for the internet of things. The satellite contains several payloads. One payload is a bring-into-use placeholder for Indonesias PT Pasifik Satelit Nusantara known as the Nusantara H-1A.

The Nusantara H-1A payload will enable the operator to retain Ka and Ku band rights to a geostationary orbital slot reserved for a satellite that has been delayed. Other payloads on G-Space 1 include an orbit guard space situational awareness imaging system and an experimental rendezvous and docking payload. G-Space 1 has a design lifetime of 15 years.

The Falcon Heavy is scheduled to fly three more missions this year. The USSF-52 mission is scheduled for launch no earlier than June 23, while the Echostar 24 (Jupiter 3) payload will fly no earlier than this coming August. The NASA Psyche asteroid probe launch is targeted for Oct. 5.

(Lead image: Falcon Heavy being prepared for rollout before the ViaSat-3 Americas mission. Credit: SpaceX)

The post ViaSat-3 Americas set for expendable Falcon Heavy launch appeared first on NASASpaceFlight.com .



======================================================================
Link to news story:
https://www.nasaspaceflight.com/2023/04/viasat-3-americas/


--- Mystic BBS v1.12 A47 (Linux/64)
* Origin: tqwNet Science News (1337:1/100)